Bowfishing Arrows & Points: The Complete Guide (2026)
BowLog · · 7 min read
Your bow gets the attention, but the arrow does the work. A bowfishing arrow has to punch through water, hit a moving fish, hold that fish while it tears line off your reel, and then do it all again a hundred more times. That is a different job than any hunting arrow ever faces, and it is why bowfishing arrows look and work nothing like the arrows in your quiver. Here is everything that matters when you pick one.
What are bowfishing arrows made of?
Nearly every bowfishing arrow is a solid fiberglass shaft, usually 5/16 inch thick. Fiberglass wins for three reasons. It is heavy, around 1,400 grains and up, which is five times the weight of a hunting arrow. That weight is what drives the arrow through water instead of skipping off it. It is nearly indestructible, so it survives rocks, stumps, and boat decks. And it is cheap enough that losing one to a log does not ruin your night.
- Solid fiberglass: the standard. Heavy, tough, affordable. Shoot this until you have a reason not to.
- Carbon and fiberglass hybrids: stiffer and straighter for longer shots and big-game applications. They cost two to three times more.
- What you will not see: aluminum and wood. Aluminum bends on the first rock it meets, and wood soaks up water. Neither survives this sport.
Why bowfishing arrows have no fletching
Look at any real bowfishing arrow and you will notice the back end is bare. No feathers, no vanes, nothing. That is on purpose. Fletching helps an arrow stabilize over long distances in air, but bowfishing shots happen at ten to twenty feet, often half into the water. At that range fletching adds nothing. Worse, it snags your line, catches water like a rudder, and steers the arrow off a fish. The weight of the shaft itself keeps a bowfishing arrow flying straight for the short trip it makes. If you see a “bowfishing” picture with a fletched arrow, someone who has never done this made it.
Bowfishing points: what type and when
Bowfishing rigs use barbed points. The barbs flare open after the point passes through the fish, which is what keeps a thrashing carp on your line instead of sliding off the shaft. Getting the fish off is the clever part: on almost every modern point you loosen or reverse the tip and the barbs fold flat, so the arrow slides back out without a fight.
- Standard two-barb points: the everyday choice for carp, buffalo, and most rough fish. Quick to reverse, easy to resharpen.
- Heavy or armored-fish points: stouter tips and stronger barbs built for gar and big-game fish. A gar’s armor plate laughs at light points, so upgrade before a gar trip, not after.
- Three-barb and specialty points: more holding power for soft-fleshed big fish where tear-outs lose you the night.
Our partners at AMS Bowfishing have made arrows and points in Wisconsin for over 45 years, and their point lineup covers everything from pond carp to alligator gar. If you are unsure, a standard AMS point on a white fiberglass shaft is the setup more bowfishers run than any other.
The line connection: use a slide
Your line has to attach to the arrow somehow, and how you do it is a safety issue. Tying line straight to the back of the arrow invites the line to tangle around your reel or bow at the shot. When that happens the arrow can whip back at your face. An arrow slide fixes this: the line ties to a ring that rides along the shaft, staying in front of the rest at the shot and sliding rearward as the arrow flies. Every arrow you buy today should have a slide system on it, and most quality arrows come with one installed.
Arrow rests for bowfishing
Skip the drop-aways and whisker-style rests from the deer woods. They hold water, gum up with weeds, and are built for speed you do not need. Bowfishing rests are simple on purpose: a roller rest lets the heavy shaft glide smoothly, and a hook or prong-style rest holds the arrow secure while you swing on moving fish. Simple means nothing breaks at midnight two miles from the ramp.
Taking care of your arrows
- Check the shaft before every trip. Flex it and look for cracks or splinters. A cracked fiberglass shaft can shatter at the shot.
- Spin the point tight. Points work loose over a night of shooting, and a loose point is how a 20 pound carp swims away with your arrow.
- Re-tie your line connection every few trips, and retire line that shows fray. The knot is the cheapest part of the system and the most common failure.
- Resharpen or replace tips when they stop punching clean holes. Water, rocks, and gar plate all dull a point faster than you think.
One more thing worth logging: which arrow and point you were shooting when the fish hit the deck. Patterns show up fast. BowLog records the full rig on every catch, so a month from now you are not guessing which point held gar better. The data answers it.
Frequently asked questions
- Do bowfishing arrows have fletching?
- No. Bowfishing arrows are bare shafts with no feathers or vanes. Shots are too close for fletching to help, and it would snag the line and plane in the water.
- What are bowfishing arrows made of?
- Almost all are solid 5/16 inch fiberglass, heavy and nearly indestructible. Carbon hybrid shafts exist for longer shots and big-game fish at a higher price.
- What type of point does a bowfishing rig use?
- A barbed point. The barbs open after passing through the fish to hold it on the line, then reverse or fold flat so you can slide the arrow back out.
- Can you reuse bowfishing arrows?
- Yes, for seasons. Inspect the shaft for cracks, keep the point tight and sharp, and re-tie the line connection regularly.
- Do you need a special rest for bowfishing arrows?
- Yes. Heavy fiberglass shafts need a simple roller or hook-style rest. Hunting drop-aways and whisker rests foul with water and weeds.
Built by bowfishers, for bowfishers.
BowLog pins every harvest and remembers your spots, so you spend less time guessing and more time on the water. Join the waitlist and we'll tell you the moment it's live.
Join the waitlist